Communication between Beijer iX and Omron PLC

ajack

Member
A
Join Date
Mar 2012
Location
Ho Chi Minh
Posts
1
Dear all,

I got a problems with communication between Beijer iX HMI panel and Omron CP1H PLC.

I did follow the instruction, user manual and try as many options as possible.
In HMI setting, I also try FINS destination address and FINS source address to 0!
Moreover, I try many setting in PLC as Toolbus for FINS protocol, Serial Gateway for Host Link protocol, but nothing happens...

Can someone give me some advices?

Thanks,

ajack

PLC Setting.png HMI Setting.png HMI protocol select.png Host Link model.png
 

Similar Topics

D
Communication between Citect and Beijer E410 Terminalæ
Hi everyone I have a communication problem with Citect polling data from some drives through a Beijer E410 terminal. The Citect is...
Replies
0
Views
3,851
Dariusch
D
S
Communication not done between Woodward controller and PhoenixIO
I have Woodward Controller EASYGEN-3500XT and Phoenixcontact make IO CAN-CUPLER part no: 2702230, Analog Input card: 2861412, Analog Output Card ...
Replies
0
Views
23
Sandeep Patel
S
P
Communication Between Compact Logix and Guard Logix Error
Hello Everyone, I have a issue with communication between two different PLCs. So here is the facts, The Master PLC is Guard Logix 5069 with IP...
Replies
4
Views
80
Ken Roach
Ken Roach
A
communication between two siemens plc's with different ip address
i have two plc 1. s7-1212dc/dc/dc ip; 192.168.0.1 2. s7-1500 1513-1pn ip; 192.168.3.2 i need to get data from plc1 to plc2. any idea how to do...
Replies
5
Views
102
mk42
M
Y
Communication between Delta plc DVP12SA2 and Arduino using MAX 485 module.
I'm trying to write a data in Arduino using MODWR function block .I used the code I got from online for both PLC and Arduino. I made the wiring...
Replies
4
Views
115
yawin
Y
Back
Top Bottom