so i have a program where i have operator input on the HMI for hours, minutes, seconds for a given cycle time. i wanted to have a bar graph/shape with a fill animation on the HMI for the total elapsed cycle time as well as a numeric countdown on screen for how much time is left in the cycle, so i decided to take the hours, minutes, seconds inputs from the HMI....which all have their own integer data files...and use MUL, ADD and MOV instructions to get the overall .PRE seconds for the Cycle Timer. all of that math works out well, my issue is where i need to take the .ACC timer value, subtract it from the .PRE timer value and then break it up into the remaining hours, minutes, and seconds. any advice is appreciated. Micrologix 1400 is the PLC in use here.