ladderlogix
Member
- Join Date
- May 2004
- Posts
- 26
Hi,
I used RSView Studio to write around 50 screens on a PanelView 2711P-ST 10K in order to visualize and control the system process. Now I need to use the same screens via RSView 32 works on a master computer to control the same process.
I'm using SLC 5/05 as processor.
Is there any way to convert these screens from RSView Studio to RSView 32 works (directly or indirectly using copy past for example)or should I rewrite all the screens?
Thanks for your suggestions!!!!!!!!!!
I used RSView Studio to write around 50 screens on a PanelView 2711P-ST 10K in order to visualize and control the system process. Now I need to use the same screens via RSView 32 works on a master computer to control the same process.
I'm using SLC 5/05 as processor.
Is there any way to convert these screens from RSView Studio to RSView 32 works (directly or indirectly using copy past for example)or should I rewrite all the screens?
Thanks for your suggestions!!!!!!!!!!