pravinshinde
Member
Hi all,
I have,
Rack1 : L62,EN2T,CN2R,RM
Rack2 : L62,EN2T,CN2R,RM
(All are upgraded as per 19.5 Redundancy Bundle)
With this configuration my redundancy is working properly.
But when I have,
Rack1 : L62,EN2T,EN2T,CN2R,RM
Rack2 : L62,EN2T,EN2T,CN2R,RM
(All are upgraded as per 19.5 Redundancy Bundle)
With this configuration my redundancy is NOT working properly.
It gives me DISQ.
When I remove
Slot-1 EN2T from Rack-1 and Rack-2
OR
Slot-2 EN2T from Rack-1 and Rack-2
Redundancy works properly.
Any suggession ?
I have,
Rack1 : L62,EN2T,CN2R,RM
Rack2 : L62,EN2T,CN2R,RM
(All are upgraded as per 19.5 Redundancy Bundle)
With this configuration my redundancy is working properly.
But when I have,
Rack1 : L62,EN2T,EN2T,CN2R,RM
Rack2 : L62,EN2T,EN2T,CN2R,RM
(All are upgraded as per 19.5 Redundancy Bundle)
With this configuration my redundancy is NOT working properly.
It gives me DISQ.
When I remove
Slot-1 EN2T from Rack-1 and Rack-2
OR
Slot-2 EN2T from Rack-1 and Rack-2
Redundancy works properly.
Any suggession ?