Hi everyone,
I need to establish the communication with two differents PLC platforms (Siemens S7 400 and Micrologix 1400) for a project. We acquired a gateway prosoft PLX31-EIP-SIE. The manufacturer video that explain how to do this process with the RSLogix 5000 software, but i have to complete this communication with RSLogix 500 software with a Micrologix 1400. The option that appear in the the video is the following:
go to I/O configuration>>>> select module
but this option do not appear in RSlogix 500.
Any help will be appreciated
Regards
P.S.
The link of the video is Attached below :
https://www.youtube.com/watch?t=11&v=loQRWNG900M
I need to establish the communication with two differents PLC platforms (Siemens S7 400 and Micrologix 1400) for a project. We acquired a gateway prosoft PLX31-EIP-SIE. The manufacturer video that explain how to do this process with the RSLogix 5000 software, but i have to complete this communication with RSLogix 500 software with a Micrologix 1400. The option that appear in the the video is the following:
go to I/O configuration>>>> select module
but this option do not appear in RSlogix 500.
Any help will be appreciated
Regards
P.S.
The link of the video is Attached below :
https://www.youtube.com/watch?t=11&v=loQRWNG900M