You are not registered yet. Please click here to register!


 
 
plc storereviewsdownloads
This board is for PLC Related Q&A ONLY. Please DON'T use it for advertising, etc.
 
Try our online PLC Simulator- FREE.  Click here now to try it.

---------->>>>>Get FREE PLC Programming Tips

New Here? Please read this important info!!!


Go Back   PLCS.net - Interactive Q & A > PLCS.net - Interactive Q & A > LIVE PLC Questions And Answers

PLC training tools sale

Reply
 
Thread Tools Display Modes
Old February 13th, 2020, 10:23 AM   #1
JankyPLC
Member
United States

JankyPLC is offline
 
Join Date: Sep 2016
Location: NW WI
Posts: 10
All Weather Sensing?

Heres the situation, CDLR conveyor feeding pallets of product through the building wall, last 12 feet are exposed to the weather (midwest) so the pallets can be picked by forklift drivers outside to be taken wherever. System needs to be able to run 24/7/365.

The problem: We need to sense the product on the conveyor to know when and when not to send more pallets. PEs work fine in nice weather, but we've had nothing but trouble finding a way around snow. Between roller is preferable to eliminate the risk of forklift damage.

We use Sick 1063129 indoors with great success. Outdoors despite the rating, we have condensation issues under the lense, and snow buildup on the lense, even with hoods and blowoffs, and rollers prevents proper sensing.

Above the rollers is an option but then it becomes a game of how to protect from forklift drivers, and snow on sensor faces can still be an issue. Does anyone have experience or ideas on how to combat?
  Reply With Quote
Old February 13th, 2020, 11:29 AM   #2
Kip Williams
Member
United States

Kip Williams is offline
 
Join Date: Nov 2015
Location: North Carolina
Posts: 6
Load cell???

Maybe consider adding a load cell under the conveyor legs.
  Reply With Quote
Old February 13th, 2020, 11:41 AM   #3
MHennel
Member
United States

MHennel is offline
 
Join Date: Jun 2002
Location: Cincinnati, OH
Posts: 50
I have used Sick heated photo-eyes and heated reflectors in Freezer environments that were at -10F. We had condensation issues when when mounted hear a freezer door that went from the -10F to 28F temperature. The heated components helped a lot. Not sure anything would help if you got a large amount of snowfall.
  Reply With Quote
Old February 13th, 2020, 03:26 PM   #4
ASF
Lifetime Supporting Member
Australia

ASF is offline
 
Join Date: Jun 2012
Location: Australia
Posts: 3,072
Capacitive proximity perhaps? In between the rollers looking up - they'd need to be pretty flush so they were close enough to detect wooden/plastic pallets, but you'd have no issues with condensation etc.

Not sure if they'd be able to distinguish between a wooden pallet and a large dump of snow, but then again that's probably no worse off than any other sensor. If you have hoods/blowoffs in place already, that may get you by.

Otherwise you could look at a small form factor ultrasonic sensor. I had a client with a similarly challenging application - detecting trains in a coal loading facility. Everything was absolutely caked in coal dust within 5 minutes of operation, and the trains were a fair distance from the sensor mounting location, and they were all different sizes and shapes so the distance from sensor to train varied quite a bit. In the end he found an 18mm barrel-type ultrasonic switch, and it worked like a charm.
  Reply With Quote
Old February 13th, 2020, 04:02 PM   #5
OkiePC
Lifetime Supporting Member
United States

OkiePC is offline
 
OkiePC's Avatar
 
Join Date: Mar 2005
Location: ENE of Nowhere Oklahoma
Posts: 10,458
Quote:
Originally Posted by Kip Williams View Post
Maybe consider adding a load cell under the conveyor legs.
This would be much more bullet proof. Costly but once set up, should be solid. I worked in a food plant that had Emery Winslow Hytronic (hydraulic) load cells mounted on some massive mixers and grinders and they were bullet proof. The electronics were well protected in a separate enclosure where the four corners were summed and scaled and sent off the a display/transmitter in a separate room away from the washdown environment. Once in a great while there might be a leak and the techs would have to purge out air and refill the lines. I was amazed that we could weigh a 10000 pound batch of meat in a 50000 pound machine and get within 10 pounds pretty consistently.

https://www.emerywinslow.com/technology.html
__________________
You can choose a ready guide in some celestial voice. If you choose not to decide you still have made a choice.
  Reply With Quote
Old February 13th, 2020, 04:40 PM   #6
James Mcquade
Member
United States

James Mcquade is offline
 
Join Date: Oct 2007
Location: Tennessee
Posts: 2,711
Can you install a canopy over the line and allow the fork trucks to pick up the pallets? have the canopy 2 times the width of the line and conveyor on each side to help block the snow and rain. make it wider if necessary. that's what we did.


James
  Reply With Quote
Old February 14th, 2020, 12:26 AM   #7
chud
Member
South Africa

chud is offline
 
chud's Avatar
 
Join Date: Oct 2007
Location: KALAHARI
Posts: 950
I have seen CDLR with one of the entrance rollers removed from the chain drive and then spring loaded to sit a little bit higher than the rest of the rollers. Then once a load is placed on it, it pushes down and an inductive sensor is used to detect the roller shaft.
Something like the SICK IQG inductive range will work well in very harsh conditions
  Reply With Quote
Old February 14th, 2020, 12:46 AM   #8
ValeoBill
Member
Canada

ValeoBill is offline
 
Join Date: Aug 2019
Location: Wasaga Beach, Ontario
Posts: 18
What kind of control system? A PLC could use a shift register to track the part. A pulser on a chain driven sprocket could measure distance travelled. A physical positive stop should be used as a backup in the event of a switch failure.
I've had some luck using ultrasonic switches monitoring parts travelling on a monorail. They work well in heat and dirt environments. I don't know how they would hold up in your environment. If it comes to it, call in sensor manufacturers. They are all too happy to help if it means a significant sale or even just getting their foot in your door.
Keep us posted on how you make out.
  Reply With Quote
Old February 18th, 2020, 08:19 PM   #9
rankhornjp
Member
United States

rankhornjp is offline
 
Join Date: Dec 2008
Location: Georgia
Posts: 214
Does it have to be non-contact?
  Reply With Quote
Old February 19th, 2020, 12:20 AM   #10
Holmux
Lifetime Supporting Member
Denmark

Holmux is offline
 
Join Date: Oct 2013
Location: Aalborg
Posts: 162
I have tackled this a few times using ultrasound sensors, get some with a long range and place them in a 45 degree angle with a cover 200 mm above them, so you shoot clear of the cover and no snow will build up on them.
  Reply With Quote
Old February 19th, 2020, 07:17 AM   #11
mad4x4
Member
United Kingdom

mad4x4 is offline
 
Join Date: Mar 2009
Location: ST CYrus
Posts: 73
What about a Laser beam sensor (break Beam) to detect that the truck is in at the loading point. You get single point ones that detect a reflector. We use it to detect tank position to advise the forklift to stop using a traffic light system.

IFM do https://www.ifm.com/gb/en/category/0...1/D/0/F/0/T/24


Guess you could also at angle so pallet in position breaks beam

Last edited by mad4x4; February 19th, 2020 at 07:20 AM.
  Reply With Quote
Reply
Jump to Live PLC Question and Answer Forum

Bookmarks


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Topics
Thread Thread Starter Forum Replies Last Post
AC Current Sensing Using PLC khansaab21 LIVE PLC Questions And Answers 4 March 20th, 2011 02:52 PM
Short Sensing / Current Sensing takkka LIVE PLC Questions And Answers 3 February 4th, 2011 12:49 PM
Dillemma: DC Motor Control vs. Torque Sensing JonHopper LIVE PLC Questions And Answers 21 May 27th, 2010 01:47 PM
RSview SE, VBA & Weather fischb22 LIVE PLC Questions And Answers 1 November 27th, 2008 09:01 PM
Sensing Corona discharge. BigAl LIVE PLC Questions And Answers 9 January 8th, 2008 12:39 AM


All times are GMT -5. The time now is 10:04 PM.


.