Ones_Zeros
Member
Hello,
I have a AB Powerflex 700 VFD drive that I have connected to our network via a CAT5 cable to a switch.
I would like to read various parameters like (freguency, amps, & voltage) from the Powerflex 700 into our SCADA program (Wonderware). How would I read these parameters, by name or by a register number?
thanks for helping
I have a AB Powerflex 700 VFD drive that I have connected to our network via a CAT5 cable to a switch.
I would like to read various parameters like (freguency, amps, & voltage) from the Powerflex 700 into our SCADA program (Wonderware). How would I read these parameters, by name or by a register number?
thanks for helping