AB plc 2/16

Stan122

Member
S
Join Date
Mar 2008
Location
illinois
Posts
1
I am trying to install the ab 6200 software on a flash drive and use a dual boot win xp pc to load win 98 from a flash drive, so far
i have the software working on an old Pc. But i dont have any PLC 2/16 programs files to see if i can open them with the software ( lost all of them when my TI terminal went belly up ). any one out there have a 2/16 file set i can use to try the software?
 

Similar Topics

S
Siemens PLC Main Disconnect Trip
The past week we received a new piece of equipment from Germany which utilizes siemens controls. Typically in our company we use A.B. controls for...
Replies
6
Views
86
drforsythe
D
N
Conveyor PLC
the conveyor can stop because of a safety sensor or safety switch. And also it can stop because of an object jam detector sensor. If the conveyor...
Replies
5
Views
142
geniusintraining
geniusintraining
T
PLC Delta DVP 12SE and HMI Kinco GL043E not propperly connecting
Good Day to all of you, this is my first post, i will try to explain as best as possible, english is not my natural language. I am performing an...
Replies
0
Views
33
Tecnolaundry
T
Mas01
S7-TIA Portal: How can I make a project if I've only got the code loaded on the PLC?
Hi All, Someone at work has put a PLC system on my desk, that's just been taken off an idle production line. He said "It's an S7 PLC. We don't...
Replies
10
Views
211
bkottaras
B
A
ATS using a PLC
I have a project to automate four generator sets. The system will monitor and store the load demand of the factory. Once there's Power outage, the...
Replies
0
Views
58
Alibaba07
A
Back
Top Bottom