Hi to all!
Has anyone encountered such an error? What could be?
Error code list[Error code 2401]
Applicable machine QnA series PLC
=====================================================================================
Error code(SD0) 2401
Error message FILE SET ERROR
Common information(SD5-12) File name
Individual information(SD13-20) Parameter No.
LED status(RUN) OFF
LED status(ERROR) Flashing
PLC operating state Stop
Diagnostics timing At power ON & reset
Error description & cause
File designated for the fault history file (PLC RAS parameter setting), etc., cannot be created.
Corrective action
Read out the error individual information to a peripheral device, and check/correct the drive name and file name corresponding to that information(parameter No.)
Check the memory card’s remaining memory area.
Has anyone encountered such an error? What could be?
Error code list[Error code 2401]
Applicable machine QnA series PLC
=====================================================================================
Error code(SD0) 2401
Error message FILE SET ERROR
Common information(SD5-12) File name
Individual information(SD13-20) Parameter No.
LED status(RUN) OFF
LED status(ERROR) Flashing
PLC operating state Stop
Diagnostics timing At power ON & reset
Error description & cause
File designated for the fault history file (PLC RAS parameter setting), etc., cannot be created.
Corrective action
Read out the error individual information to a peripheral device, and check/correct the drive name and file name corresponding to that information(parameter No.)
Check the memory card’s remaining memory area.