I am looking to receive remote support on a Kinetix drive. I am having trouble getting one to work, and I don't have time to go back and forth. I use teamviewer for remote support, please let me know if you are interested.
Kinetix 5500 support
- Thread starter xertechx
- Start date
Similar Topics
Hello gentlemen,
I have Allen Bradley Servo drive(P/N: 2198-H040-ERS) in stock.
However, the servo motor should be Allen Bradley VPL-B1003F...
Hi all,
I am upgrading a couple of 2094-BC01-M01 servos with 2198-H015-ERS. The original code uses MSG instructions to control (release, engage...
Hello everybody,
I have Kinetix 5500 (2198-H040-ERS). I'm having issue with this drive. (I believe it's the drive/Kinetix and need confirmation)...
Good day:
I am wondering if anyone has experience with the Kinetix 5500 S33 Fault. I have 3 drives in a group set as follows:
2198-H025-ERS2...
Hi guys!
I have 3 servos for X,Y,Z axis controlled by Kinetix 5500.
In Studio 5000 there is one Predefined tag in AXIS_CIP_DRIVE called...