hi....guys...i am using PL7 junior v4.3 software for TSX MICRO PLC -MODICON MAE ..can u guys suggest me how to establish communication betwenn PLC and pc?..i tried but failed to communicate .i am using TSXPCX1031 cable for communication. error showing is NOT POSSIBLE TO ESTABLISH PHYSICAL LINK WITH PLC ADDRESS SYS VIA DRIVER UNTLW01...........
Pc and plc coomunication problem
- Thread starter niyaz432
- Start date
Similar Topics
Hi all,
looking to model old RR relays in PLC. Does anyone have any SPECIFIC examples on how to model a relay such as a polar relay, slow pickup...
HelloI need software to download the program from PLC EH-A28DRP from an old machine whose manufacturer does not exist. It may be Ladder Editor for...
HI everyone,
i am new to Siemens plc programming and i am in need of some help.
yesterday we had an S7-1200 CPU 1214C fail to turn on an output to...
Hello,
I have a Mitsubishi FX3G 14M PLC and a E615 HMI from Mitsubishi/Beijer.
I'm using GXWorks 2 to do the programming and I have no problem...
Hi,
I'm trying to import a Rockwell/AB EDS to Beckhoff but I'm not sure how to import/install the EDS. It is a PowerFlex 525 EDS. Is there a way...
