hi....guys...i am using PL7 junior v4.3 software for TSX MICRO PLC -MODICON MAE ..can u guys suggest me how to establish communication betwenn PLC and pc?..i tried but failed to communicate .i am using TSXPCX1031 cable for communication. error showing is NOT POSSIBLE TO ESTABLISH PHYSICAL LINK WITH PLC ADDRESS SYS VIA DRIVER UNTLW01...........
Pc and plc coomunication problem
- Thread starter niyaz432
- Start date
Similar Topics
I'm trying to integrate a Beckhoff IPC with a Controllogix PLC. There is some documentation, on the Beckhoff website, on how to do a PLC-PLC comms...
kindly need to understand why can't upload the plc
Hello all,
I have a one problem.
I would like to upgrade Mitsubishi PLC Q02 to Q03UDVCPU. I have Q02 program and I change to PLC type and try to...
The past week we received a new piece of equipment from Germany which utilizes siemens controls. Typically in our company we use A.B. controls for...
the conveyor can stop because of a safety sensor or safety switch. And also it can stop because of an object jam detector sensor. If the conveyor...
