Lakee911
Member
I have a client who is running FactoryLink 7.2.1. They have numerous PLC-5 and SLC processors connected to the FactoryLink PC with DH+.
We would like to install a ControlLogix chassis with an Ethernet comm. module and a DH+ Scanner and use this to bridge the DH+ to Ethernet. We would then move the FactoryLink pc to Ethernet.
The entity that would be reconfiguring RSLinx on the FactoryLink PC (to use the new Ethernet DH+ bridge), warned me that I need to make sure I have a "CIP Driver" for FactoryLink. I've searched and I don't think any such animal exists. Besides, if FactoryLink communicates with RSLinx and the changes are made in RSLinx, then nothing changes on FactoryLink. Right?
Thx
Jason
We would like to install a ControlLogix chassis with an Ethernet comm. module and a DH+ Scanner and use this to bridge the DH+ to Ethernet. We would then move the FactoryLink pc to Ethernet.
The entity that would be reconfiguring RSLinx on the FactoryLink PC (to use the new Ethernet DH+ bridge), warned me that I need to make sure I have a "CIP Driver" for FactoryLink. I've searched and I don't think any such animal exists. Besides, if FactoryLink communicates with RSLinx and the changes are made in RSLinx, then nothing changes on FactoryLink. Right?
Thx
Jason