real time clock

Sibtain raza

Member
S
Join Date
Sep 2017
Location
Pune
Posts
1
good morning all of you..
can any one help me out to stop execution of programming after a particular date or time in delta PLC model DVPSA2
 
If you're planning to include a time bomb in your program to "protect" yourself in the event your customer doesn't pay for your services, my advice is don't do it. If you shut down someone's machine or process by mistake, the consequences to your reputation and professional standing far outweigh any benefits.
 
Steve Bailey said:
If you're planning to include a time bomb in your program to "protect" yourself in the event your customer doesn't pay for your services, my advice is don't do it. If you shut down someone's machine or process by mistake, the consequences to your reputation and professional standing far outweigh any benefits.
Click to expand...
+1

Not to mention the legal, and even criminal ramifications if someone gets hurt. Or even production loss.
 

Similar Topics

A
Melsec real-time clock resolution
Hello. This is one for the Mitsubishi experts. I need to measure the time for a remote device's to return process data sent from the i-QR...
2
Replies
17
Views
2,171
parky
P
S
MicroLogix 1400--write to (adjust) real time clock
Hi all I thought I had this working but upon doing a checkup a few months after the machine was commissioned, I found that adjusting the RTC via...
Replies
4
Views
1,880
Kidblue
Kidblue
R
omron cp1e real time clock
hi all i have used a real time clock to turn on a bit after 1 month. the plc was off for this whole month and when i turned on the plc after a...
Replies
2
Views
1,427
RAJNAIK
R
N
how to export real time clock from pabelview 800 to micro 850
hey, anyone know how to export time from panelview 800 to micro 850 and to compare time? or distinguish various time , like to know which shift...
Replies
1
Views
1,469
tarik1978
T
S
changing real-time clock values via HMI
Hi again Looking to write date or time values to the RTC in my MicroLogix 1400 In the ladder logic I am using a CPW instruction as per the 1400...
Replies
13
Views
3,294
Aabeck
Aabeck
Back
Top Bottom