any_to_dint in micro800

mike_dr

Member
M
Join Date
Sep 2011
Location
Mla
Posts
215
Im using ANY_to_dint to convert the uint analog input then Im moving that uint from micro800 to compactlogix via msg. is that ANY_TO_DINT like COP instruction in compactlogix or is it a MOV?
 

Similar Topics

B
Processing DINT fault words into individual bits
Hi I am being given several fault words (as a DINT) from a Drive that I am receiving into a Compactlogix L33ER controller. I have a small...
Replies
12
Views
1,148
TheWaterboy
TheWaterboy
P
Logix 5000 UDINT from two INT
I am working on a project with a Controllogix 5582 processor using v32 firmware where I will be communicating with a Genset using Modbus TCP. It...
Replies
14
Views
997
kamenges
K
S
AllenBradley DINT preferred datatype
Hi! It is always said, that DINT is the most performant datatype in AB plcs. I while ago i made a performance test. Several instructions like ADD...
Replies
4
Views
672
JeremyM
JeremyM
J
Compact GuardLogix MSG result tag conversion dint to ascii
Im trying to use a MSG instruction to get the serial numbers of all addon cards and display the serials on a HMI interface. I have the logic done...
Replies
2
Views
577
drbitboy
drbitboy
AutomationTechBrian
Studio 5000, DINT vs INT for HMI controls.
Just something I think about when choosing data types in Studio 5000. It seems logical, but I've never looked deeply into the question. When...
Replies
12
Views
1,386
cardosocea
C
Back
Top Bottom