We are unable to access the config screen, because there is no config button on the panelview screen. It appears that the other option of re-booting the panelview and pressing the "white square" at the bottom right has been disabled.
This is what happens ;
1. Re cycle power to panelview
2. Panel view starts self test on blue background.
3/ Screen refreshes the blue background, and the white filled square appears in the bottom r.h. corner.
4/ Press the touch cell over the white square, the screen goes to a black background and displays the free memory available. This memory allocation is maintained as the white cell is pressed. On releasing the cell the screen displays the application memu and not the config. screen.
We have also tried several times to upload the software using the panelbuilder, but the link always crashes at 99% complete!
Question; Does anyone know of a way around this, without loosing the panelview programme?
This is what happens ;
1. Re cycle power to panelview
2. Panel view starts self test on blue background.
3/ Screen refreshes the blue background, and the white filled square appears in the bottom r.h. corner.
4/ Press the touch cell over the white square, the screen goes to a black background and displays the free memory available. This memory allocation is maintained as the white cell is pressed. On releasing the cell the screen displays the application memu and not the config. screen.
We have also tried several times to upload the software using the panelbuilder, but the link always crashes at 99% complete!
Question; Does anyone know of a way around this, without loosing the panelview programme?