I am trying to configure a 1771-IXE card and having some problems. When I go to to IO configure and put in the information, I get this message, "Not all configuration data will be written. The size allocation in the Block Transfer Control Block is smaller than the full module configuration size!" It is a series B card and is set up for type j thermocouples, two's complement binary format and temp F. The only problem I see in the program is that the temp is reading Celsius. I set up all the info just as it was in another processor. The PLC is a 5/30 series E-2000files/extended, revision B. Thanks for any help.