AB VPL Servo motor and IEC flange

dginbuffalo

Member
D
Join Date
Dec 2010
Location
Buffalo,NY
Posts
630
Hello all- we have a project where we wanted to use an AB Servo and VPL motor. The old linear table has a nema 23 mount that attached to the nema 23 servo motor. the new motor spec'd is a VPL motor that uses an IEC metric, flange w/free mounting holes (type FF). Any ideas on adapting?? Why does it seem AB's servo motors are all IEC and the linear tables all have nema flange mounts?
 

Similar Topics

C
Does kinetix 5500(2198-H040-ERS) support VPL-B1003F series servo motor?
Hello gentlemen, I have Allen Bradley Servo drive(P/N: 2198-H040-ERS) in stock. However, the servo motor should be Allen Bradley VPL-B1003F...
Replies
2
Views
4,132
cocoroco89
C
Jeev
Kinetix 5500, VPL, and AutoTune.
Ahoy hoy. I have used a number of K5500/VPL systems over the last couple of years, but this is starting to really annoy me. I have had to...
Replies
2
Views
3,987
Peter Nachtwey
Peter Nachtwey
T
Help with Veichi AC Servo Drive
Hi guys, I need help with position control using a Veichi AC Servo Drive model SD600A1-T2-2R2. How do I know how many pulses for it to rotary 1...
Replies
2
Views
99
tientran
T
D
Selecting fuse size for servo amplifier
Hi, I'm working on Mitsubishi MR-J5-70A amplifier, and need some advice on selecting fuse size. Main power is 1ph 240VAC, and in the manual, it...
Replies
1
Views
109
OkiePC
OkiePC
S
Servo Valve showing MSO.ER 11
Good morning, We've had an issue with a couple of servo valves and was wondering if anyone had seen anything similar. After a drop in pressure...
Replies
2
Views
125
robertmee
R
Back
Top Bottom