costimarin
Member
- Join Date
- Jan 2005
- Posts
- 1
Hi
I have an OP 3 from Vipa and it has only MPI conection (it doesn't have the standard conection for download that are at OP7, OP17 etc.) . I was trying to download the project but always got the message: "No connection to the OP".
The protocol and the cable I am using are the same like I am using for the download to the PLC:
- PG/PC Interface = PC Adapter (MPI) - I was trying with PC Adapter (Auto) too;
- the cable is the normal MPI cable + PC Adapter.
If someone of you have did this before and it was running please describe me the steps to follow.
Thank you.
I have an OP 3 from Vipa and it has only MPI conection (it doesn't have the standard conection for download that are at OP7, OP17 etc.) . I was trying to download the project but always got the message: "No connection to the OP".
The protocol and the cable I am using are the same like I am using for the download to the PLC:
- PG/PC Interface = PC Adapter (MPI) - I was trying with PC Adapter (Auto) too;
- the cable is the normal MPI cable + PC Adapter.
If someone of you have did this before and it was running please describe me the steps to follow.
Thank you.