Hi all
Now i am commissioning ABB DCS system and thier are problem in communication with AB RSLOGIX 5000 because the client gave me wrong addresses list for modbus communication.
I could see the RSLOGIX 5000 PRogram and i read some data but i have no experience with RSLOGIX
MCM Port2 Command (0)
MCM3.P2Cmd(0).enable =1
MCM3.P2Cmd(0).IntAddress=0
MCM3.P2Cmd(0).Count=10
MCM3.P2Cmd(0).Device=1
MCM3.P2Cmd(0).Fnc=16
MCM3.P2Cmd(0).DevAddress=1000
MCM Port2 Command (1)
MCM3.P2Cmd(1).enable =1
MCM3.P2Cmd(1).IntAddress=601
MCM3.P2Cmd(1).Count=100
MCM3.P2Cmd(1).Device=1
MCM3.P2Cmd(1).Fnc=3
MCM3.P2Cmd(1).DevAddress=1
Can any one have experience help me to detect the actual address from this data.
Now i am commissioning ABB DCS system and thier are problem in communication with AB RSLOGIX 5000 because the client gave me wrong addresses list for modbus communication.
I could see the RSLOGIX 5000 PRogram and i read some data but i have no experience with RSLOGIX
MCM Port2 Command (0)
MCM3.P2Cmd(0).enable =1
MCM3.P2Cmd(0).IntAddress=0
MCM3.P2Cmd(0).Count=10
MCM3.P2Cmd(0).Device=1
MCM3.P2Cmd(0).Fnc=16
MCM3.P2Cmd(0).DevAddress=1000
MCM Port2 Command (1)
MCM3.P2Cmd(1).enable =1
MCM3.P2Cmd(1).IntAddress=601
MCM3.P2Cmd(1).Count=100
MCM3.P2Cmd(1).Device=1
MCM3.P2Cmd(1).Fnc=3
MCM3.P2Cmd(1).DevAddress=1
Can any one have experience help me to detect the actual address from this data.