Kinco, samkoon, weintek

Well that sounds completely reasonable. Good to know. Not sure what I was looking at. It's been a couple of years.

Thanks for setting me straight

I see Anaheim Automation sells the Kinco HMI's. Pretty competitive!

Turn ON HMI samkoon SK when in standby mode then turn ON back when it standby back.

i wan this
1. In standby mode, when push button pressed, HMI will display. Then after 1 minute don't have any touching at screen HMI will standby mode back and if push button pressed the HMI screen will display back.

2. My problem is in standby mode when push button pressed, HMI will display. But HMI screen display 24hour/always display don't have standby mode again. That my problem. I using address LB60106 to turn it ON display but it always ON 24hour. what i want is when screen display back, it will in standby mode back.

Thank you