Powerflex 525 STO button inside enclosure

mylespetro said:
Disconnect is located on an enclosure immediately adjacent, and as I stated above they do have a strict LOTO procedure. I misunderstood that they would ever have people working on the belt with the drive powered up. Once all parties are free and clear and sign off on the LOTO, it is then powered up and jogged for a visual inspection.
Click to expand...


Huh, what were they asking for then? That the LOTO no-signal got to an additional terminal on the drive?
 

Similar Topics

M
Changing a PowerFlex 525.
Hi to all. We need to change a bad powerFlex 525 to a new one. How do you save the configuration to install in the new one? Thank you all for...
Replies
5
Views
232
James Mcquade
J
T
Teacher needs some help with Powerflex 525.
Im trying to teach a couple of labs on VFDs at a community college. We have some motor control trainers with P525s and 3 phase motors from...
Replies
2
Views
242
patrickmoneyy
P
E
Powerflex 525 programming
New to vfds. I put in parameters. IP, but I get ethernet flashing and link solid. What did I do wrong?
Replies
9
Views
473
robertmee
R
R
Powerflex 40p to 525
Are the N files in the 525 the same as the 40p for ethernet? (E-Comm card) I have used 40P with Micrologix 1400 Messaging but don't see the N...
Replies
4
Views
227
roxusa
R
T
Powerflex 525 has a frequency of 2-2.50Hz when being told to stop
Hey all, I am currently working on a depalletizer for a customer and we are doing a hoist upgrade. This is a SLC500 processor and the drives are...
Replies
6
Views
297
Tbone1465
T
Back
Top Bottom