Hi,
On the project i'm working on i'd like to connect Labview to an OPC-UA server on a B&R X20CP3586.
After the configuration of the B&R, i couldn't find the server with Labiew (with "Quick OPC client", part of the DSC Labview 2013 module).
So i tried to connect and gather more information on the server with the software Makitron OPC-UA Tunneller.
The Makitron software recognize de OPC-UA server, but i cannot connect to it.
OpcUa_BadTcpInternalError 0x80820000 An internal error has occurred.
What could have caused this internal error?
The server configuration on the B&R seems pretty simple, so i don't get what i did wrong.
Thanks.
Ps: for the moment my firewall is off and the DCOM parameters of the computers are correctly configured
image: https://ibb.co/fTff8k
On the project i'm working on i'd like to connect Labview to an OPC-UA server on a B&R X20CP3586.
After the configuration of the B&R, i couldn't find the server with Labiew (with "Quick OPC client", part of the DSC Labview 2013 module).
So i tried to connect and gather more information on the server with the software Makitron OPC-UA Tunneller.
The Makitron software recognize de OPC-UA server, but i cannot connect to it.
OpcUa_BadTcpInternalError 0x80820000 An internal error has occurred.
What could have caused this internal error?
The server configuration on the B&R seems pretty simple, so i don't get what i did wrong.
Thanks.
Ps: for the moment my firewall is off and the DCOM parameters of the computers are correctly configured
image: https://ibb.co/fTff8k