A meter for the new century

There are many classic multimeters out there, which have bluetooth and software for PC or smartphone.
The new thing here is, that it has no display?
 
Bought one a few months ago. I specifically like the concept of using a 24bit ADC to grab the voltage drop over a length of cable and calculate the Amp draw without having to break the circuit.

I also wanted to compare it to the Fluke 289 for logging. I find it is slower than the fluke.

So it sits in my drawer(with the battery uninstalled) waiting for somebody to want some kind of transient monitoring on their power inputs. I don't think of it much in day-to-day use. with no screen it is somewhat limiting.
 

Similar Topics

Dear All, Currently i'm working with Endress Hauser flowmeter and AB PLC and try to integrate with 2 items. Flow meter spec using is Promass...
Replies
3
Views
58
hi to all, have anyone tried to communicate Schneider PM800 to a ML1400 through rs485? i am having an issue with it just receiving message...
Replies
1
Views
44
Hello all, I am currently trying to program a PowerFlex 525, version 7.0. We had a power outage recently and when the power was restored, the...
Replies
10
Views
355
Hi, The hardware is: Click Plc model # CO-O1DD1-O HMI model # S3ML-R magnetic-inductive flow meter model # FMM100-1001. I will set the flow meter...
Replies
4
Views
209
Hello gentlemen, Im working on a small project on TIA Portal, about establishing a Modbus TCP connection between my ET200SP plc and a socomec...
Replies
12
Views
366
Back
Top Bottom