osamamalhy
Member
Greeetings
i do need to connect the control Teqniques Servo Drive digitax Basic to Siemens PLC
i do use Profibus communication Module in the Servo Drive
i do install the GSD file From emreson Web site
i do install the GSD file in my PLC hardware configuration
after all that i did not mange to communicate between the drive and the PLC
can any one help me with that
do some one have any prevuse project like this one
kindly advcie
i do need to connect the control Teqniques Servo Drive digitax Basic to Siemens PLC
i do use Profibus communication Module in the Servo Drive
i do install the GSD file From emreson Web site
i do install the GSD file in my PLC hardware configuration
after all that i did not mange to communicate between the drive and the PLC
can any one help me with that
do some one have any prevuse project like this one
kindly advcie