Error problem in modicon plc

jpratha

Member
J
Join Date
Jul 2016
Location
Bhubaneswar
Posts
1
We have a PLC system of 140 cpu113 02 as processor,140 crp 93100 as R I/O head of modicon.The RI/O drop is C 908 M of L&T.Very often we have communication problem between R I/O head and R I/O receiver as error A or error B and the machine stops.error goes away after recycling of power.pl help regarding this.
 

Similar Topics

T
Kinetix 6500 MAH Error Problem
I have connected an incremental encoder with 4000 pulses/rev to the auxiliary feedback connector of a Kinetix6500 module. I want to reference that...
Replies
10
Views
3,295
Ken Roach
Ken Roach
K
CX9020 file open timeout error problem
Hi fellow programmers ! I just got put onto programming a Beckhoff cx9020 PLC with twincat 3. I have run into a problem creating and opening files...
Replies
1
Views
3,140
danatomega
D
A
Error Problem on RSLogix RSEmulate 5000
I use RSLogix RSEmulate 5000 V19 and I have problem as follows, 1. When I try to download program to AB_VBP-1 , Virtual Chassis, I can not...
Replies
13
Views
35,945
AndreyIV
A
kb9ttx
1747-ASB Remote I/O problem but without error diagnostics
I have a machine that includes a PLC5/40 with two PLC5 remote racks, a PV1000e, and a SLC remote rack. About 24hrs ago, our second shift...
Replies
3
Views
3,598
Ron Beaufort
Ron Beaufort
A
op17 startup problem with $657 error.
Dear all i have op17 with ref: 6AV3 617-1JC20-0AX1 prootol softwear V6.0 SP3 i have send a configration in two op17 the first one is ok...
Replies
2
Views
1,683
STL???
S
Back
Top Bottom