You are not registered yet. Please click here to register!


 
 
plc storereviewsdownloads
This board is for PLC Related Q&A ONLY. Please DON'T use it for advertising, etc.
 
Try our online PLC Simulator- FREE.  Click here now to try it.

---------->>>>>Get FREE PLC Programming Tips

New Here? Please read this important info!!!


Go Back   PLCS.net - Interactive Q & A > PLCS.net - Interactive Q & A > LIVE PLC Questions And Answers

PLC training tools sale

Reply
 
Thread Tools Display Modes
Old February 3rd, 2017, 04:55 PM   #1
scader
Member
United States

scader is offline
 
Join Date: Oct 2014
Location: USA
Posts: 2
M340 NOE100 IO Scanning Modbus Comms to AB PowerFlex 753 Drive

Setup:
- Schneider Electric M340 PLC w/ NOE 100 Module installed
- Allen Bradley PowerFlex 753 VFD w/ 20-COMM-M Modbus Adapter installed
- Protocol - Modbus TCP/IP

Objective:
Communicate via IO Scanning to PowerFlex Drive for Logic Status/Command and Reference

My question is has anyone had anyone tried this setup and had any luck? Or does anyone with "higher intelligence" than me have any ideas on how to implement this.

I configured the IO Scanner Line as follows:
IP - IP setup in the 20-COMM-M on the drive
Unit ID - 255
Slave Syntax - Modbus
Health and Repetitive Rate - Default

I used a IO Scanner line each for read and write addresses.
Any help is appreciated.
  Reply With Quote
Old February 8th, 2017, 04:35 PM   #2
scader
Member
United States

scader is offline
 
Join Date: Oct 2014
Location: USA
Posts: 2
I got it figured out.
  Reply With Quote
Old February 8th, 2017, 06:12 PM   #3
danw
Member
United States

danw is offline
 
danw's Avatar
 
Join Date: Oct 2004
Location: midwest, USA
Posts: 2,772
What did you miss?
  Reply With Quote
Reply
Jump to Live PLC Question and Answer Forum

Bookmarks


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Topics
Thread Thread Starter Forum Replies Last Post
Using AB Powerflex 700 with MODBUS?? RPax LIVE PLC Questions And Answers 4 March 6th, 2007 03:05 AM
AB MO2AE & Yaskawa SGM drive kenschunk LIVE PLC Questions And Answers 1 September 23rd, 2006 07:25 PM
AB powerflex I/O comms fault mrdmrd LIVE PLC Questions And Answers 1 October 26th, 2005 06:46 AM
AB ControlLogix to PowerFlex4 on Modbus kamenges LIVE PLC Questions And Answers 5 June 2nd, 2005 01:03 PM
AB Drive Tools(V2.06) W/SC 300 Interface Vietnam Bob LIVE PLC Questions And Answers 0 November 20th, 2002 09:19 PM


All times are GMT -5. The time now is 10:24 AM.


.