You are not registered yet. Please click here to register!


 
 
plc storereviewsdownloads
This board is for PLC Related Q&A ONLY. Please DON'T use it for advertising, etc.
 
Try our online PLC Simulator- FREE.  Click here now to try it.

---------->>>>>Get FREE PLC Programming Tips

New Here? Please read this important info!!!


Go Back   PLCS.net - Interactive Q & A > PLCS.net - Interactive Q & A > LIVE PLC Questions And Answers

PLC training tools sale

Reply
 
Thread Tools Display Modes
Old January 4th, 2018, 12:04 PM   #1
speaksy87
Member
United States

speaksy87 is offline
 
speaksy87's Avatar
 
Join Date: May 2014
Location: PA
Posts: 8
Micro 820 fault code

I have a micro 800 that keeps going into fault mode. The fault code is 0xF000
The controller was unexpectedly reset due to a noisy environment or an internal hardware failure.
If system variable_SYSVA_USER_DATA_LOST is set, the controller was able to recover the user program.
but the user data is cleared. If not, the Micro800 Controller program is cleared.

Does this mean that if the Data-Lost variable is not set the controller deletes current program?
What could be causing this fault code to be reoccurring?
  Reply With Quote
Old January 4th, 2018, 12:54 PM   #2
damica1
Member
United States

damica1 is offline
 
Join Date: Aug 2015
Location: Illinois
Posts: 508
There is several post concerning this Fault with the Micro820 on this forum, you should read them!

I too have encountered this error on more than 1 occassion, and have found it to be associated with 2 things - atleast for me.

1. I use an RTO offen and I found one of my variable was set incorrectly(However - I was also using an older "Firmware"!
2. So it seems that (Re-flashing or updating) the firmware solved all of my problems.

So you can try just re-flashing if you are at current firmware(10.01) or update to the latest(10.01).

Keep us posted.
__________________
David M. Camp

Marshall Electric / https://mei-tech.com/monitor-and-control

Please Download from our download section "Monitor and Control" .pdf.
  Reply With Quote
Reply
Jump to Live PLC Question and Answer Forum

Bookmarks


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Topics
Thread Thread Starter Forum Replies Last Post
PowerFlex 525 and CompactLogix - Fault 1 Code from Drive Won't Clear Baker in Virginia LIVE PLC Questions And Answers 4 August 30th, 2017 08:39 PM
Powerflex 755 fault code 926 esponda LIVE PLC Questions And Answers 1 April 2nd, 2017 05:43 AM
Micro 820 Messaging SLJackson LIVE PLC Questions And Answers 1 July 3rd, 2015 03:13 PM
F009 fault in Micro Master MM440 drive. mvannantn LIVE PLC Questions And Answers 0 June 7th, 2010 03:19 AM
SLC 5/03 fault code 0021h JojoD LIVE PLC Questions And Answers 3 November 8th, 2008 11:21 PM


All times are GMT -5. The time now is 01:04 AM.


.