med_amin81
Member
- Join Date
- Mar 2005
- Posts
- 1
i have a broblem with communication between a PLC Alspa C80- 35 and my PC,I use P8 software (Error S37 appear "pas de communication")
Communication with alspa C80 - 35
- Thread starter med_amin81
- Start date
Andrew Evenson
Member
med_amin81,
"pas de communication" means there isnt any communications between your PC running P8 and the PLC. See this thread for a link to Alstoms website where you can find manuals for the PLC and the software.
http://www.plctalk.net/qanda/showthread.php?t=17253
Andrew Evenson
"pas de communication" means there isnt any communications between your PC running P8 and the PLC. See this thread for a link to Alstoms website where you can find manuals for the PLC and the software.
http://www.plctalk.net/qanda/showthread.php?t=17253
Andrew Evenson
Similar Topics
Parker 590 drive to Siemens 300 over Profibus
Hi all,
I have a studio 5000 project that incorporates a Rexroth Indradrive Cs servo amplifier, a Kistler Joiner, with a maXYmos measuring/control...
I am working with a remote rack with a 1771-ASB adapter, and inside Logix 5000 I am trying to find where it displays the status of each of the...
We had a site where a rat gnawed through some fiber optic cables which (obviously) prevented communication to a remote rack entirely. We, and the...
I have a slc500 plc 1747-L30A. Using a communication cable 1747-PIC cable box combination. Running a version of software from DOS on a Windows 3.1...
