med_amin81
Member
- Join Date
- Mar 2005
- Posts
- 1
i have a broblem with communication between a PLC Alspa C80- 35 and my PC,I use P8 software (Error S37 appear "pas de communication")
Communication with alspa C80 - 35
- Thread starter med_amin81
- Start date
Andrew Evenson
Member
med_amin81,
"pas de communication" means there isnt any communications between your PC running P8 and the PLC. See this thread for a link to Alstoms website where you can find manuals for the PLC and the software.
http://www.plctalk.net/qanda/showthread.php?t=17253
Andrew Evenson
"pas de communication" means there isnt any communications between your PC running P8 and the PLC. See this thread for a link to Alstoms website where you can find manuals for the PLC and the software.
http://www.plctalk.net/qanda/showthread.php?t=17253
Andrew Evenson
Similar Topics
Hi folks,
I have a Controllogix in communication with a zigbee coordinator using Logix AIO for modbus tcp. This zigbee coordinator have 3 slaves...
Hello, i am using profibus as communication between plc and fanuc arm. I can easily send inputs from plc to arm, but i can't monitor any outputs...
I have Woodward Controller EASYGEN-3500XT and Phoenixcontact make IO CAN-CUPLER part no: 2702230, Analog Input card: 2861412, Analog Output Card ...
Hello Everyone,
I have a issue with communication between two different PLCs. So here is the facts, The Master PLC is Guard Logix 5069 with IP...
i have two plc
1. s7-1212dc/dc/dc ip; 192.168.0.1
2. s7-1500 1513-1pn ip; 192.168.3.2
i need to get data from plc1 to plc2. any idea how to do...