Siemens KTP600 Basic Colour HMI

moggie

Lifetime Supporting Member
M
Join Date
Apr 2002
Location
Devon, England.
Posts
661
I have a KTP600 Basic colour HMI which keeps losing its program.
The HMI is connected to the S7 300 PLC via MPI

Every 2 to 3 weeks the program has to be re-loaded.

Any suggestions?
 

Similar Topics

E
Siemens KTP600 Basic PN HMI communication with Modbus TCP/IP
I have been working on communicating with Siemens KTP600 Basic PN HMI from my microprocessor. The main communication protocol that HMI uses with...
Replies
2
Views
12,604
dabanani
D
J
Siemens S7-1200 with KTP600 alarms problem
dear automation experts: i am using a S7-1200 1212c 6ES7212-1AD30-0XB0, with siemens KTP600 comunicating via ethernet. Problem descritpion: -...
Replies
1
Views
2,901
Mike_RH
M
S
Siemens PLC Main Disconnect Trip
The past week we received a new piece of equipment from Germany which utilizes siemens controls. Typically in our company we use A.B. controls for...
Replies
9
Views
241
mburtis
M
A
reading data from siemens controller (profinet) to ethernet/IP controller
Hello I have a s7-1200 and I would like to read the tags present in this controller with my controllogix controller. The two controllers don't use...
Replies
5
Views
155
bkottaras
B
J
Emergency Stop reset Siemens
Hi need help why this “failure 5 emergency stop “ appears at every startup in the morning ? Have to shut off main switch at least 10 times on...
2
Replies
19
Views
311
John Lee
J
Back
Top Bottom