JCreel
Member
Hello, i have a 1756-EN2F adapter that i am trying to connect to a Stratix 5700 on the fiber uplink port. The switch part number is 1783-BMS20GCN, and the card will not link to the switch. I do have a 1GB sfp installed the the fiber port of the switch, and i think the EN2F is only rated at 100mB/s, however i thought the speed would auto-negotiate.
The Link light on the EN2F is not even flashing, so it seems like its not even trying to connect. I am also using a muti-mode connector to the switch like rockwell recommends, and still no link. Is there any other steps that have be taken in order to make the fiber come online?
Does anyone have any thoughts on this, or maybe I'm missing one important piece.
Thanks for any help or comments
The Link light on the EN2F is not even flashing, so it seems like its not even trying to connect. I am also using a muti-mode connector to the switch like rockwell recommends, and still no link. Is there any other steps that have be taken in order to make the fiber come online?
Does anyone have any thoughts on this, or maybe I'm missing one important piece.
Thanks for any help or comments