1756-HIST2G Historian ME

Bullzi

Lifetime Supporting Member
B
Join Date
Jun 2012
Location
Colorado
Posts
1,530
Just starting a new project. One of the modules spec'd is a 1756-HIST2G FactoryTalk Historian ME. Has anyone ever used this module before? Any advice on implementing it? There seems to be a minimum Firmware version but nothing that shows the max Firmware version. Since I was able to add it to my v21 project does that mean it will work with v21?

I have downloaded the Manual and I am looking at it but just want to start out on the right foot. Thanks for any advice you can give.
 
I wouldn't worry about it.
If Studio 5000 "took" the revision at hand you'll be fine.
Historian ME modules are totally different "creatures" than any other mainstream 1756 hardware.
 

Similar Topics

Y
1756-HIST2G - Controlloigx
Anyone any idea how to install the Historian Module into the controllogix rack configuration, using RSLogix 5000 Enterprise. Dont seem to be able...
Replies
1
Views
1,809
TWS
T
R
1756-L71S
Hi all I have a ControlLogix 1756-L71SP that i want to use for general PLC applications, not safety. I am running Studio5000 v33, i can't...
Replies
2
Views
74
Revver
R
R
Allen-Bradley Analogue Input 1756-IF16 Scaling
Hi, I have a ControlLogix system with 1756-IF16 analogue inputs. I can't scale the inputs at the card as there is a requirement to facilitate...
Replies
14
Views
371
Rich0147
R
T
1756-IA 16/A
Hi, I have two quick questions: 1- Could I use 1756-IA16/A with TTL inputs? Sourcing (PNP)? Sinking (NPN)? Either one? 2- What does /A in the part...
Replies
6
Views
162
TOPTAB
T
H
A/I module 1756-IF16 Allen Bradley
Hi all, installed on chassis A17 an A/I from Allen-Bradley , problem is what ever I do , all channels are sticked on value 39.9 and cannot change...
Replies
1
Views
146
dummy_bit
dummy_bit
Back
Top Bottom