1794 L34 series B V13.31

CHRIS_G

Member
Join Date
Aug 2016
Location
Georgia
Posts
2
Does anyone know the limitation of the Flexlogic L34 Processor I have been asked how high I can flash this processor forward from my research I have seen none higher than V15. I am more used to using newer versions of RS5000 and am unfamiliar. Our main controls guy here is trying to streamline versions of firmware and is a Modicon fan not Allen Bradley, so this has been dumped into my lap. I would imagine we should just upgrade to a compact logix processor however figured I would ask anyway.
 
Last edited:

Similar Topics

Good morning. I'm looking at switching out an older 1794-L34 FlexLogix PLC. My plan was to take out the FlexLogix PLC and add a 1794-AENT then add...
Replies
4
Views
533
I have a customer that has a 1794-L34 and they can not communicate to it using a CP3 cable, they said that the port maybe configured to DH485 I...
Replies
2
Views
1,503
Hi all, I am trying to get an 1794-IRT8 module working with my 1794-L34 Flex Logix R16.22 controller. When I add the module it faults and gives...
Replies
0
Views
2,553
Hi All. I have a AB 1794-L34 PLC running a program with many routines. Is there any "quick-and-dirty" way that I can measure how long it takes...
Replies
6
Views
6,321
having a issue and just wondering if anyone else has run into something like this. have a l34 with 2 local busses. anytime we power down the unit...
Replies
9
Views
3,565
Back
Top Bottom