Mister Mac
Member
Hi everyone,
I have an industrial scales which can provide BCD signals out of a 25pin female D-sub port.
I want to be able to read in the weight into a Conpactlogix PLC. Can I get a converter to convert these to ethernet and read them in as a DINT or must I wire each core of the cable into DI cards?
Thanks
I have an industrial scales which can provide BCD signals out of a 25pin female D-sub port.
I want to be able to read in the weight into a Conpactlogix PLC. Can I get a converter to convert these to ethernet and read them in as a DINT or must I wire each core of the cable into DI cards?
Thanks