AB ControlLogix5000, ControlNet

[Contr_Conn]

Edit:
OK I got it now.

Technically you don't have to schedule it,
HMI is not scheduled connection.
Just go online, select this secondary network, set NUT, UMAX and SMAX and "save as"

See 1756-um523 page 2-5

 

[sadanand_kulkarni]

Thanks a lot Mr. Contr Conn. I will do it this way and let you know the result. Again thanks much for your help.
Regards,
Sadanand

 

[sadanand_kulkarni]

Mr. Contr Conn,

this was long back we had this discussion and now is the time that I could do it with actual hard ware in place. I did it exactly the way you had said. It works absolutely fine. Thanks much for your help.

Regards,
Sadanand