AB PVc C600 to PV 800 migration with S7-200 plc

[monsam39]

Hi All
I have an issue with the PV800 (C800) panelview. I had to upload the C600 program first. Then using CCW, i created the new program.
I cannot find the cooms setting for a S7-200 plc on the configuration page of the CCW prgram.
Any ideas?
Thanks

 

[A_G]

Sounds like you want to use a Allen Bradley Panelview HMI with a Siemens PLC. Not sure exactly what has to be done to make this work. I found this thread on the Siemens forum that may be helpful:

https://support.industry.siemens.com/tf/WW/en/posts/panelview-plus-600-i-need-an-eds/146296?page=0