AB5/25 Comm Cable 9 Pin

dedwards

Member
D
Join Date
Apr 2007
Location
Alabama
Posts
1
I am fairly new to the PLC Community. I have a AB5/25 Processor that I need to connect to using RSLogix but I have no comm cable. I want to know if anyone knows the pin config. so I can make a cable?

Thanks to anyone who can help me with this. I am in dire need of this info as my b/u is down and I am on my last Processor.

D. Edwards
 
The PLC5/25 9 pin port is a DH+ port( not a serial port if thats what you were thinking). see pic:
PLC5_25DH+port.jpg

Therefore you will need a KF2 box ( RS232 to DH+ converter)
or a KTX card ( desktop card) or a 1784-PCMK card ( PCMCIA card) see pdf
Or here:
http://www.protocolconverter.com/products/DL3500.htm

http://www.equustek.com/
 
Last edited:

Similar Topics

L
Time clock software for AB5
Ga-day, I have a complicated time clock program to blow the start/stop and break horn where I work. I have to alter the times every month or two...
Replies
7
Views
5,926
llarson
L
F
AB5 Updating Program Descriptor
Just wanted to know if there is a way to update program descriptors on others pc's without updating the full program?Some of the programs are...
Replies
2
Views
1,967
Thomas
T
F
AB5 timer bit accum/7 ?
Ran across this bit in an AB5 program the other day"T4:75.ACCUM/7".Can someone please tell me what the /7 is? Thanks freefifo
Replies
4
Views
4,128
freefifo
F
R
Danfoss Aquadrive FC202 - Local command only if no comm
Hey guys. As the title suggests, I need to configure a Danfoss Aquadrive FC202 inverter, so that its logic inhibits the local command when the...
Replies
2
Views
54
Revnus
R
A
Ethernet comm problem with PLC when inverter enables.
Hi; In a cabinet of a machine, a Fatek PLC with an Ethernet communication card is working. In the same cabinet, there is a 1 kW inverter. When...
2
Replies
16
Views
536
Gleichner33
G
Back
Top Bottom