Adatek SLC

Horned Toad

Member
H
Join Date
Jan 2005
Location
Remote West Texas
Posts
14
Greetings!
I was wondering if any of you had any thoughts on Adatek state logic controllers. Isn't the hardware GE 9030 and the programming done in state logic? I am currently looking into purchasing one of these systems as a training aid for myself and I already have several 9030 plc's. OR... is there a few tweeks to the hardware as well? I have recently installed Proficy ME and I'm trying to broaden my rather limited exposure to different plc types. Any input would be appreciated!
 

Similar Topics

J
Sending temperature from SLC-5/02 to EZiMarquee
I’m attempting to send a temperature from a SLC-5/02 to an EZiMarquee display. The vendor said to use a MSG instruction to send the data to the...
Replies
1
Views
95
dmroeder
dmroeder
M
SLC 505 Outputs not firing
Hello all. I have a few SLCs in my plant and of late we've seen a weird issue: The system will be running normally and then randomly the outputs...
Replies
2
Views
104
Mark_J
M
I
Prosoft Datalogger w/ DF1 Comms to SLC 5/05 - Testing with MicroLogix
I am working on setting up a Prosoft Datalogger model PLX51-DLplus-232. This unit will be collecting data from a SLC 5/05 on the DB9 port set to...
Replies
3
Views
111
Ken Roach
Ken Roach
A
SLC messaging with a ControlLogix redundant system
I have a redundant ControlLogix being set up. This program reads a value from a remote site which happens to be SLC PLC. Rockwell mentions SLC...
Replies
2
Views
104
robertmee
R
A
SLC messaging with ControlLogix redundancy
Hello, I have a ControlLogix redundant controller being set up. The program reads a value from a remote site which hosts a SLC PLC. Rockwell...
Replies
0
Views
86
Alfredbeni
A
Back
Top Bottom