Adding 1738-AENTR to RSLogix 5000

[python01]

I need to add 1738-AENTR ArmorPoint Ethernet module to Logix5000 system.
I have 1756-A13 backplane with 1756-L63 Controller and 1756-ENET/A Communication Interface.
I did download the Add-on profile and installed it, the message at the end said that everything is installed correctly.
However I still do not see the 1738-AENTR module in the New Device pop up window, what might be wrong?
How can I verify that the add-on profile was installed correctly?
I am using RSLogix 5000 Standard Edition, V18.02.00(CPR 9 SR 2).

 

[GTUnit]

Starting on pg33

http://literature.rockwellautomation.com/idc/groups/literature/documents/um/1734-um014_-en-p.pdf

You need to manually add the module to the tree under the ENET