Adding 1769-AENTR to V19 RSL5K I/O tree

nochehuatl

Member
nochehuatl
Join Date
Jan 2012
Location
Cali
Posts
11
I am adding a 1769-AENTR compactlogix I/O for chemical dispensing control.
I have added the Add on profiles for the device , but the catalog file does not show. Not sure if this is because the version needs to be V20?

I heard this can be done through using the "ETHERNET MODULE" generic.

Has anybody out there done this? Any feed back would be great.

Thanks
 

Similar Topics

C
adding 1769- IF8 (1.5 slots wide) to full compactLogix rack
my customer has a full 1769-compactlogix rack. they want to remove the two cards in slot 5 and slot 6 and replace them with two new cards. The...
Replies
4
Views
1,591
_Dock_
D
B
1769-IR6 -Adding cards to application Properties/revision select does not have 1.3
Good Morning , I have a Compactlogix application and I'm adding cards to it. I purchased new cards and I'm selecting the FW versions of the...
Replies
0
Views
997
Baker in Virginia
B
Z
Adding new 18mm interlock switch to a circuit
Hi, I need help adding a new interlock switch to an existing circuit. I have never done on the existing circuit. I did set it up on the...
Replies
6
Views
277
ziyaddin2015
Z
S
Adding a RFID to a 15” comfort pro
Hi all I’m looking at adding a RFID card reader to comfort panel pro , how do you set the rfid up can you connect to existing users and password...
Replies
0
Views
94
stu
S
S
TIA-portal - Adding connection to HMI in a different project
Hello all! So I have one project with a S7-1214 and a MTP1500 "Project1" and one project with another S7-1214 "Project2". Both of these PLC:s need...
Replies
6
Views
148
swedeleaner
S
Back
Top Bottom