Hi, we have a punch press machine with a light curtain with 1M-T-9A Banner safety relay.
We are adding a simple limit switch for a gate(guard). As you can see in the picture, I am adding a relay that is energized when the gate is closed. The light curtain signal wires go through the relay contacts.
Is this safe? Any better ideas? Thank you.
We are adding a simple limit switch for a gate(guard). As you can see in the picture, I am adding a relay that is energized when the gate is closed. The light curtain signal wires go through the relay contacts.
Is this safe? Any better ideas? Thank you.