adding a picture

scroll down below the message box where you type your post and... gasp... click attach files.

Much better than having to rely on a hosting site that might disappear or choose to not allow remote linking without paying all of a sudden. Especially for a site that is made to help people for many years.

you can also choose insert image. its the icon that looks like a postcard and allows you to link to an url.

like this

plc_FP0.jpg
 
Last edited:
How the hell do you add a picture on this forum
I have never seen such a poor forum in 32 years on message boards
None of the usually image hosting sites will work with this forum
I have tried almost everyone
Imageshack, tinypic etc

Then why are you here. There must be better forums to dump on!
 

Similar Topics

Hello all! So I have one project with a S7-1214 and a MTP1500 "Project1" and one project with another S7-1214 "Project2". Both of these PLC:s need...
Replies
6
Views
88
Hi Everyone, Currently we have three plants running with Controllogix PLCs (L72, L73, L74). In each of these plants we have 2 FTView SE...
Replies
0
Views
79
Hello, Im building project with 1756-L82ES controller and 1756-IB16S card but i cant find it when trying to add the card to IO configuration...
Replies
3
Views
150
Hello, I have a pair of redundant 1756-L71 controllers rev 24. These controllers currently have produced and consumed tag interfaces to 3 other...
Replies
2
Views
177
I'm adding an IAI Gateway with 2 axes connected to it. To an ethernet network on my PLC. So, I think the math is correct on the Input and Output...
Replies
0
Views
151
Back
Top Bottom