Adding sAO table to MOSCAD

jtn

Member
jtn
Join Date
Jan 2006
Location
Washington
Posts
256
When I append the user table with an sAO multiple column table and click OK, the next window pops up where you enter a column name and the last index. These fields are not editable and the field that should show that the table is an sAO table is greyed out and is blank. Any tips or ideas on where I am going wrong? This is happenening on Toolbox version 9.52 and 9.54.
 

Similar Topics

S
Adding a RFID to a 15” comfort pro
Hi all I’m looking at adding a RFID card reader to comfort panel pro , how do you set the rfid up can you connect to existing users and password...
Replies
0
Views
42
stu
S
S
TIA-portal - Adding connection to HMI in a different project
Hello all! So I have one project with a S7-1214 and a MTP1500 "Project1" and one project with another S7-1214 "Project2". Both of these PLC:s need...
Replies
6
Views
112
swedeleaner
S
C
Adding PanelView Plus 7 to the network
Hi Everyone, Currently we have three plants running with Controllogix PLCs (L72, L73, L74). In each of these plants we have 2 FTView SE...
Replies
0
Views
88
celso3093
C
B
Adding IB16S to the IO configuration - Logix Designer v31
Hello, Im building project with 1756-L82ES controller and 1756-IB16S card but i cant find it when trying to add the card to IO configuration...
Replies
3
Views
164
robertmee
R
J
Adding Produced and Consumed Tags with redundant 1756-L71 controllers
Hello, I have a pair of redundant 1756-L71 controllers rev 24. These controllers currently have produced and consumed tag interfaces to 3 other...
Replies
2
Views
187
johnplatt55
J
Back
Top Bottom