Allen Bradley 172 - I OF2

[Baggy]

Hi,
I am looking for information on how to correctly wire a analog 1762 if2 of2. The manuals available do not give specific info and it is wired different than a regular analog module. I am using it with a AB 1100 for a class project.

 

[danatomega]

This manual clearly shows the wiring connections on page 13 & 14:
http://literature.rockwellautomation.com/idc/groups/literature/documents/in/1762-in005_-en-p.pdf

You will need to select voltage or current for the inputs. The outputs are wired for voltage or current.

 

[GTUnit]

How clear it is can be relative to the experience of the person looking at it.
The AB diagrams in this case can be a bit confusing.

You need to include specific details when you ask a technical question otherwise it wastes peoples time when they need to ask for things that should have been stated.

What type of sensor are you using?
What is the range of the sensors output?

 

[Baggy]

Sorry for the lack of information. I am in the process of learning. I was looking for a voltage change 0-10 with the module connected to the 0-10 input on a VFD. I was using the input of the module to control the output to the drive, first attempt the voltage did not change, I disassembled and rebuilt the simple circuit and it worked as expected.