CENTER
Lifetime Supporting Member
I was wondering if any one has any ideas how I can set up 2 process controllers that communicate with either RS232 or PROFIBUS to my existing system, made up of a
AB PV 1500 Plus touch screen and a MicroLogix 1764 LRP Processor. I would like to set a bit in each process controller from the recipe in the PV.
I have seen equipment on line that from a Ethernet device I can have 4 RS232 ports but with the price of the AB Ethernet card and the 4 port unit it would be an expensive experiment and is beyond my scope. So any ideas would be appreciated.
AB PV 1500 Plus touch screen and a MicroLogix 1764 LRP Processor. I would like to set a bit in each process controller from the recipe in the PV.
I have seen equipment on line that from a Ethernet device I can have 4 RS232 ports but with the price of the AB Ethernet card and the 4 port unit it would be an expensive experiment and is beyond my scope. So any ideas would be appreciated.