kbrenchley
Member
does anyone know if you can access N7 and N27 addresses to the bit level and how using a data table access module on a slc 5/03
allen bradley dtam
- Thread starter kbrenchley
- Start date
Ken Roach
Lifetime Supporting Member + Moderator
Welcome to the Forum !
There was an original DTAM, also called the "DTAM-E", with a grey bezel and there was a DTAM Plus with a black bezel that was more programmable.
I know the original DTAM could not address Integer (N7:xx) files to the bit level.
Post the exact part number and/or a picture or description of the device and I'm sure someone can help more.
There was an original DTAM, also called the "DTAM-E", with a grey bezel and there was a DTAM Plus with a black bezel that was more programmable.
I know the original DTAM could not address Integer (N7:xx) files to the bit level.
Post the exact part number and/or a picture or description of the device and I'm sure someone can help more.
controlled
Lifetime Supporting Member
I have serviced few machines that have DTAM plus, which I can access to the BIT level.
Similar Topics
Hello,
I have a machine that had an SLC 5/02 with Link Coupler, DTAM, etc. and the processor and power supply failed, losing the program. Tried...
Need Help
I am looking for software for Allen Bradley Dtam Plus . I think it is 2707 NP.
thanks
I was wondering if anyone knows what software I need to get too upload/download and modify A-B DTAM Operator Interface Modules.
I'm Trying to upload a program from a DTAM Micro 2707-M485P3. What do I need to do? I have the dip switch set for upload/download. My laptop has a...
Hi, I have a ControlLogix system with 1756-IF16 analogue inputs. I can't scale the inputs at the card as there is a requirement to facilitate...