Allen Bradley Micro850 Modbus Msg

[rohit_plc]

Hi,

Iam Working in a project where Micro850 and Epson ROBOT is there, I need to read and write bits to and from ROBOT. Iam Using TCP/IP and Configured Modbus MSG2 Instruction Which Working and Talking to Robot. Problem is iam only able to Write and Read First bit to Modbus Address not all.

Any Help ??

 

[gclshortt]

http://www.plctalk.net/qanda/showthread.php?t=111101

The above thread may help you out.
Check out the Modbus Command Code. This determines what information is being read and written.

Regards,