Allen Bradley no longer on the Building

Rick Densing

Member
Join Date
Apr 2002
Location
Milwaukee, WI
Posts
1,538
I drove by the old AB clock tower building the other day.
It used to say "Allen-Bradley" on the side. Then it had a small "A Rockwell Company" below it. Soon after the two names switched places with "Rockwell Automation" on the top

Now it just says "Rockwell Automation". Nothing else. I don't know when it happened, I don't get down that way much, but I thought it would be interesting to you folks here.
 
It's only been 20 years since Rockwell bought Allen-Bradley Company. You figure they'd find a way to change the sign eventually, eh ?

I'll start to get nervous if they tell us they have to change the octagon tatoos on our butts.
 
Ken - I'll ask you about that at your next presentation in our area if you make another snide AutomationDirect reference. Of course I have the green smiley face on mine.
 
Leadfoot said:
Is that the Clock tower affectionately refered to as the "POLISH MOON"?

Yessir, aina!

For those that don't know. The area used to be in a largely Polish section of town. It is now mainly Hispanic.

Ken- I knew it was coming, just interesting to mark the passing.
 
you make another snide AutomationDirect reference

Now that's just not right. Perhaps that octagon will be changed to a smiley :ROFLMAO: .

<kidding>

Andy
 
Rick Densing said:
Yessir, aina!

For those that don't know. The area used to be in a largely Polish section of town. It is now mainly Hispanic.

Ken- I knew it was coming, just interesting to mark the passing.


How much is Polish sausage going for today?
 

Similar Topics

in allen bradley kinetix 300 drive first E31 error shows after resting drive E11 error occurs need solution to reset E11 fault code
Replies
3
Views
94
Hi, I have a ControlLogix system with 1756-IF16 analogue inputs. I can't scale the inputs at the card as there is a requirement to facilitate...
Replies
14
Views
416
Dear community, I am trying to find a tool for Allen-Bradley PLCs similar to SiVArch for Siemens PLCs to automatically generate faceplates and...
Replies
0
Views
111
Hi everyone, new to forum. Since very long time i having issue with 1734-AENT module, after some period of time its keep stuck in error (simmilar...
Replies
19
Views
781
Hello, I am new here. I am trying to find good places to sell some surplus items that I have that isnt through ebay. Does anyone have any sources...
Replies
6
Views
472
Back
Top Bottom