Allen-Bradley: RsLinx OPC Server over Controlnet

Ing_MarineAuto

Member
I
Join Date
May 2013
Location
Zamudio
Posts
1
Hello!!!

I have a redundant ControlLogix PLC, connected to a third-party SCADA over Controlnet. I need to configure the RsLinx OPC topic in the HMI in order to get the data from the PLC. I have already created a new topic, but Im lost in Advanced Communication tab, with Local or Remote Addressing part (path to remote Controlnet port), I don't know which is the address structure (I'm using RsLinx Classic Proffesional v2.57).

Can anyone help on this?

Thanx a lot!

Controlnet_Port_Path.jpg
 

Similar Topics

Dayvieboy
Remote access to an Allen Bradley PLC without RsLinx Enterprise
Besides a $3,000 license to purchase a RsLinx Gateway License for every remote computer network that I work on. Is there another way to get to a...
Replies
4
Views
2,696
Dayvieboy
Dayvieboy
B
RSLinx message receipt using Allen Bradley Gateway
Does anyone have experience receiving unsolicited messages using RSLinx through an Allen Bradley gateway? We're trying to send message over DH+...
Replies
0
Views
2,401
burbrink
B
M
Allen Bradley Rslinx & ML 1500 Lrp Error : STS : 10
Hello Allen Bradley MicroLogix 1500 LRP and get the following error while trying to connect to the PLC CPU is not connecting. What is the...
Replies
6
Views
4,465
makdeniz
M
L
allen bradley rslinx who problem
i had a virus on my computer that our i.t. department removed.now when i start rslogix5 and do a who active i get a error "Need register file...
Replies
5
Views
4,376
Lancie1
Lancie1
K
Factory Link/allen Bradley Rslinx Driver
We just got a new computer and in the process of moving Factory link to it and get it up and running.We had to install a different card a...
Replies
0
Views
5,102
kevin91172
K
Back
Top Bottom